Geka Bendicrop

Punches and Dies home page » Geka Bendicrop

Tell a friend Bookmark & share:	Go back » Details: Manufacturer: Geka Website: http://www.geka.es/geka/de/bendicrop-2704.asp?cod=2704&nombre=2704&nodo=&orden=True&sesion=1347
Description: One cylinder working station with five work stations  Exclusive from Geka Permanent bending station  complying with CE standards. Thanks to the blade holder's vertical movement, machine has an excellent performance in all its five work stations: punching notching shear for flat bars angle cutting cutting of round and square bars Fitted with an anti torque system to reduce deformation when shearing flat bars.       FEATURES inches Shearing flat bars 350 x 15 mm Punching Ø 27x15 mm Shear of angle section L at 90º 80x80x8 mm Bending 100x10 mm Notching 90x42x10 mm     The BENDICROP model is fitted with a touch and cut length stop and is delivered with two V-shaped bending dies of 40 and 70 mm . Permanent bending station complying with CE standards. Goose neck die-holder for punching of D and E sections on legs and webs. . Quick tool change Angle shearing without loss of material. Wide range of openings for B and A . Flat bar and plate shearing system with minimum deformation F mitre shearing up to 45º. Rectangular notching with table Also suitable for tube notching, rectangular notching, etc… Anti torque system for flat bar shearing without deformation.